Advantages of using automatic screw feeder
Traditional manual locking screws have gradually been eliminated
Seals–Automatic Screw Feeder is constantly improving, saving costs in terms of manpower, while greatly improving production efficiency and quality.
✔Cost:
The operation is simple and fast, and it can be operated by a single person, which saves a lot of personnel.
✔Efficiency:
Simply press the lever and the Screwdriver will complete the screw fastening automatically.It provides faster operating up to 20~30 screws per minute.And automatic feeding to completely save the screw picking and moving action.
✔Quality:
1.Correctly guide the screws, arrange, feed and lock.
2.Accurate torque control to strengthen the quality of customer products.
3.Can provide Short supply detection and warning functions are included，Thread-slipping detection and warning functions are included.and a complete function of judging the status and quality of the lock screw.
4.Automatic Screw feeding.No more screw picking and moving action, and the product will not be contaminated by the stains generated when the screws are taken by hand, or the screws will be stained by hand stains to make it rust.
✔Labor:
1. It saves manual picking and placing of screws and reduces labor intensity.
2. The lever-activating design shall meet the ergonomics and labor-saving requirements.
✔Diversified models:
Choose models according to products and needs, and can also be customized to meet the needs of the production line.
It can also be fully automated according to the needs of the production line.
✔Scope of application:
Wide range, mobile phones, keyboards, computers, automobiles and motorcycles, circuit boards, color LCD screens, speakers, optical lenses, fans...etc.
- Related Products
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Automatic Screw Feeder with Lever-Activating Design
CM-40T
SEALS CM-40T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-40T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
Vibration Bowl Type Automatic Screw Feeder
CM-501
SEALS CM-501 Vibration bowl type automatic screw feeder could speed up to 50 pieces per minute. And, it could design for screw from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.
-
VGA, DVI Card Automatic Screw Feeder
CM-B1
SEALS CM-B1 is designed for fastening stand off screws into DVI, VGA card. Due to the auto bit pushing function, SEALS CM-B1 allow horizontal fastening in conveyor blet assembly line. This feature let screw fastening in line not off line to reduce plenty of time. For the narrow space due to connector, SEALS automatic screw feeder adopt extra thin JAW to engage screw holes without conflicting with DVI, VGA connector.
Robot Type Automatic Screw Feeder
CM-TABLE
SEALS XY Table automatic screw feeder reduce manpower in screw fastening process. SEALS CM-TABLE screw feeder also could let screw fastening be programmable, data collectable, default detecting to improve assembly quality by system and to enhance the stability without effecting by person. Due to different application, we would adopt belt driven with step motor or ball screw driven with servo motor.