Can it be locked in a deep hole?

Application: Deep hole of refrigerator door

Menu

Best Sale

Chengmao Can it be locked in a deep hole? Introduction

Chengmao Tools Industrial Co., Ltd. is Taiwan supplier and manufacturer in Hand Tools Industry. Chengmao has been offering our customers high quality Spring Balancer, Air Nipper, Tool Balancer, Air Terminal Crimper, Hose Balancer, Automatic Screw Feeder, Torque Reaction Arm, Linear Arm, Tool Supporting Arm, Fasten Stroke Cylinder Equipment and Automatic Screw Feeding Machine since 1977. With both advanced technology and 46 years experience, Chengmao always make sure to meet each customer's demand.

Can it be locked in a deep hole?

Application: Deep hole of refrigerator door
Application: Deep hole of refrigerator door

Seals automatic screw feeder has a wide range of applications, suitable for any workpiece, and can lock curved surfaces, deep holes, and side tightening products.

The picture on the right shows the refrigerator door application. The screws are not obstructed and the alignment is accurate.

Related Products
  • Automatic Screw Feeder with telescope screwdriver set - Automatic Screw Feeder with telescope screwdriver set(Model:CM-30)(Volumn：M3 x 15 2000 pcs)(Feeding：30 Pcs/min)
    Automatic Screw Feeder with telescope screwdriver set
    CM-30

    SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.

  • Automatic Screw Feeder with Lever-Activating screwdriver set - Automatic Screw Feeder with Lever-Activating screwdriver set(Model:CM-30T)(Volumn：M3 x 15 2000 pcs)(Capacity：30 pcs/min)
    Automatic Screw Feeder with Lever-Activating screwdriver set
    CM-30T

    SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.

  • Automatic Screw Feeder with telescope screwdriver set - Automatic Screw Feeder with Lever-Activating Design(Model:CM-40T)(Volumn：M3 x 15 2000 pcs)(Capacity：30 pcs/min)
    Automatic Screw Feeder with telescope screwdriver set
    CM-40

    SEALS Automatic Screw Feeder, CM-40, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduces noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw even before you move to the next fasten position. By equipping a horizontal vibration chute, it could make feeding much easier for screw with washer, light weight screw, painting, etc. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw, etc. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.

  • Automatic Screw Feeder with Lever-Activating Design - Automatic Screw Feeder with Lever-Activating Design(Model:CM-40T)(Volumn：M3 x 15 2000 pcs)(Capacity：30 pcs/min)
    Automatic Screw Feeder with Lever-Activating Design
    CM-40T

    SEALS CM-40T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-40T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.

  • Vibration Bowl Type Automatic Screw Feeder - Vibration Bowl Type Automatic Screw Feeder(Model:CM-501)(Volumn：M3 x 15 2000 pcs)(Capacity：50 pcs/min)
    Vibration Bowl Type Automatic Screw Feeder
    CM-501

    SEALS CM-501 Vibration bowl type automatic screw feeder could speed up to 50 pieces per minute. And, it could design for screw from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.