What types of Seals automatic screw feeder are there?
Choose the right type according to the company's product needs.
Seals automatic screw feeder is divided into Hand-held, Vibration Bowl, Robot Type, Spindle Type, Index Table, Gantry Type XY Table, VGA, DVI Card, You can refer to the following words and sentences to select the appropriate type of automatic screw feeder.
Chengmao is constantly improving technology and developing new products. For more details, please refer to the 「Product Introduction」 column above to see more. You can also fill in the 「Product Inquiry Form」 or welcome to call us. A dedicated person will reply you as soon as You choose the most suitable product.
(一)Hand-held–Automatic Screw Feeder
The hand-held automatic screw feeder replaces the traditional one to hold the screws in one hand and the other to lock the screws,The automatic screw feede can free up one hand, and when a screw is locked, the feeder will automatically send the screw to the batch nozzle .
The advantage is that it will not cause secondary pollution to the product due to the stains on the hands or stain the screws and make it rust.
(二)Vibration Bowl–Automatic Screw Feeder
The screw feeding capacity can reach 45-50 screws per minute, and automatic screw feeding, no more screw picking and moving action, and simple structure and easy maintenance. Has a wide range of screw sizes.
【One Outlet】
Capacity could be up to 30mm in length for M1.5~M8 screw.
【Two Outlets】
Capacity could be up to 30mm in length for M3~M8 screw.One feeder supply screws for two screwdriver sets independently.
(三)Robot Type-Automatic Screw Feeder
The desktop automatic screw feeder is for the Robot Type the screws, and the screws are automatically locked according to the set coordinates, and the operation is flexible, The number of working memory modules is up to 255 groups or 30,000 points, and different working memory modules can be replaced through the control panel within 1 minute, which is suitable for small and diverse production.
Short supply detection; Thread-slipping detection and warning functions are included.
(四)Spindle Type-Automatic Screw Feeder
It can be installed on a fully automated assembly line, and the mold can be automatically locked after positioning. It can also be installed on a semi-automatic assembly station.
The operator can install it vertically, horizontally or at other angles according to requirements. Just pick and place the workpiece. It is simple to set the torque adjustment, without any tools.
(五)Index Table–Automatic Screw Feeder
Index Table Automatic Screw Driving Machine.providing efficient screw assembly system for substation operation. With 4 stations, 6 stations, 8 stations and other split plate configurations, the operator only needs to load and unload the materials to the rotating jig, that is, complete all the screw locks in the substations in sequence, and realize the continuous production workstation. As the proficiency increases.
the speed is adjusted to increase productivity, and through improved automation, it replaces manual assembly to increase product quality and value.
(六) Gantry Type XY Table–Automatic Screw Feeder
The gantry type XY table is convenient to make, bears a large load, has a stable structure, and supports multiple screw locks. Cost-saving, high efficiency, and optional warning function of safety protection shutter. Automatic screw machine locks are widely used in auto parts, computer peripherals, and large metal and plastic parts.
(七) VGA, DVI Card –Automatic Screw Feeder
Specifically for standoff screw.
【Automatic Screw Feeder】
Ergonomic design, The operating speed can reach 30 screws per minute.
【Programmable automatic screw feeder】
One person can operate 2 ~ 4 machines at the same time, touch-sensitive man-machine interface, quick and convenient operation, 4 screws can be locked automatically within 10 seconds。
- Related Products
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Vibration Bowl Type Automatic Screw Feeder for Two Screwdriver Sets
CM-502
SEALS CM-502 Vibration bowl type automatic screw feeder supply screws for two screwdriver sets independently. SEALS CM-502 allows two operators with different screw consumption speed. For each screwdriver set, it could speed up to 45 pcs screw per minute. This could much reduce the unit cost. SEALS CM-502 could design for screw size from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.
Robot Type Automatic Screw Feeder
CM-TABLE
SEALS XY Table automatic screw feeder reduce manpower in screw fastening process. SEALS CM-TABLE screw feeder also could let screw fastening be programmable, data collectable, default detecting to improve assembly quality by system and to enhance the stability without effecting by person. Due to different application, we would adopt belt driven with step motor or ball screw driven with servo motor.
Index Table Automatic Screw Feeder Fastening System
CM-INDEX
SEALS Rotateable Index Table Automatic Screw Fastening System provides high efficiency screw assembly system. With roatateable index table, the operator only need to up-load work-piece into work-piece fixtures. CM-INDEX also could be customized for two or more fastening process for different positions to achieve free flow work station. With serial working sequnce, it also enhances work step control and quantity management. Meanwhile, with its adjust rotate speed, you could also increase productivity. And, you could improve assembly quality by automation rather than manpower to increase product value for customer.
Gantry Type XY Table Automatic Screw Fastening Machine
CM-TABLE-GANTRY
The gantry type automatic screw fastening machine adopts XY horizontal shifting adopts servo drive, ball screw sliding table in gantry structure, and carries X-axis rails with two Y-axis bracket rails to form a tight and stable structure. Different from cartesian robot, the repeat accuracy and loading ability are more applicable.By integrating SEALS air blow automatic screw feeder machine, each screw can feed up to 0.2 seconds, and the high-precision XY servo slide module can greatly reduce the XY TABLE moving distance by more than 60%.The gantry robot is solid in structure with large load, stable structure, and support for multiple screw fastening. It can save cost, high efficiency, good quality, and can be equipped with a warning function for safety light curtain. It is widely used in the engineering for automatic screw feeding and fastening for automobile parts, computer peripherals, and large metal and plastic parts.
Programmable VGA, DVI Card Automatic Screw Feeder Machine
CM-40AUT
Professional automatic screw feeder, SEALS CM-40AUT, is designed for assembling two or four stand off screws in DVI, VGA card. CM-40AUT is programmable and teachable in the positions For the narrow space due to connector, SEALS automatic screw feeder adopt extra thin JAW to engage screw holes without conflicting with DVI, VGA connector. Like CM-30T, CM-40T, SEALS CM-B1 also has ergonomic design of auto bit pushing feature. Meanwhile, its auto pushing function also allows horizontal assembly without hand pressing or holding PCB board in conveyor belt system. For automation purpose, except SEALS CM-40AUT, CM-B1 automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.