CM-300 Series→Woodworking Application
model:CM-300 Three-axis Automatic Peg Pin Insertion Machine
➤ CM-300 
Three-axis Automatic Peg Pin Insertion Machine
The PIN (Location Pillar) is pressed into the specified position quickly and stably by automatic feeding.
【Detailed description】
The operator only needs to press the start switch,，The mechanism presses three PINs (Location Pillars) into the workpiece at the same time.
The actions of sending PINs (Location Pillar) and pressing workpiece are repeated in a loop.
It saves the time of placing PINs (Location Pillar) manually, thus improving work efficiency, reducing labor costs and working time, and making the production methods more diverse and convenient.
【Operation Diagram】
【Introduction Video】
Photo Gallerys
- Related Products
Multi Spindle Automatic Screw Feeding and Fastening Machine
CM-200~CM-800
SEALS Multi Spindle Automatic Screw Feeding and Fastening Machine, CM-200~CM-800, provide customized design machine for fastening several screw simultaneously. In addition, the rotatory equipment carrying two work-piece fixtures also separate the working and loading area to enhance productivity and safety. Meanwhile, with correspond SEALS reliable feeder and torque control screwdrivers give a stable and efficient assembly output.
Spindle Type Automatic Screw Fastening Module
CM-100R
SEALS Automatic Screw Fastening Module CM-100R is designed and specialized for 6 axis robot arm, Scara robot, Gantry robot, Cartesian robot , XY TABLE and automated machinery. CM-100R could integrate by interface plates with auto machine and quickly installed on a variety of machines .After aiming the CM-100R on the screw hole by auto machine, CM-100R push scrw out, fasten and re-fed the screw within 1~2 seconds. ( Actual time will be calculated accord to screw length, thread width, screwdriver r.p.m. , self-tapping or not, etc. )Adopting several automated sensing elements , the control system can control CM-100R operating status precisely .Chengmao can estimate the weight of the CM-100R in advance to match the loading capacity of the automated robot.CM-100R module is a best module for automation supplier.SEALS CM-100R have pre-integrated all functions required for automatic locking screw machine. By choosing CM-100R, the supplier no need to design all the details of screw clamps, electric screwdriver, torque consideration, an abnormal movement, slide, screw feed, line configuration, signal transmission interface and installation.CM-100R provides automation equipment manufacturers, fast delivery, stable and reliable, the best specifications and diverse optional modules, to integrate the screw fastening function into your automatic machine design rapidly.The CM-100R can be installed as one or multiple units. Through reasonable arrangements of deliver hose, the robot arm can move for various angles.
Gantry Type XY Table Automatic Screw Fastening Machine
CM-TABLE-GANTRY
The gantry type automatic screw fastening machine adopts XY horizontal shifting adopts servo drive, ball screw sliding table in gantry structure, and carries X-axis rails with two Y-axis bracket rails to form a tight and stable structure. Different from cartesian robot, the repeat accuracy and loading ability are more applicable.By integrating SEALS air blow automatic screw feeder machine, each screw can feed up to 0.2 seconds, and the high-precision XY servo slide module can greatly reduce the XY TABLE moving distance by more than 60%.The gantry robot is solid in structure with large load, stable structure, and support for multiple screw fastening. It can save cost, high efficiency, good quality, and can be equipped with a warning function for safety light curtain. It is widely used in the engineering for automatic screw feeding and fastening for automobile parts, computer peripherals, and large metal and plastic parts.