Air Plastic Cutting Nippers
FD series
The nipper edge of FD series was machined as thinness and sharpness for cutting the gate after plastic injection or deburring the plastic products and molded resin products.
FD-8P air nipper could make a fine and clear cutting plane by its flat and wide sharpen nipper. SEALS air plastic nipper FD series could apply on plasti cand resin with different diameter capacity. Please refer to the specification table below.
Nickname
Power Plastic Cutter, Power Resin Cutter
Features
SEALS use special treatment material for the blade, just for copper wire, iron wire, plastic, connector, wire locker, etc. There are six series with thirty models for variety of chooese.
SEALS use aluminum material for the body with the advantages of light and convenience. Meanwhile, we adapt the volume adjuster for moderate operation power.
It is easy to replace the blade.
Plastic Cutting Blade
| Blade Model | Capacity (mm) | Body Model | |
|---|---|---|---|
| Soft Plastic | Hard Plastic | ||
| FD-6 | 5.0 | 4.0 | YM-140 AM-140 |
| 7.0 | 4.0 | YM-140L | |
| FD-8P | 10.0 | 6.5 | YM-300 AM-300 |
- Movies
- Related Products
Air Nipper / Air Terminal Crimper ( 140kg pressing power)
YM-140
YM-140 has a aluminum die casting body with 45mm diameter. By equipped versatile blades from SEALS, it could apply in cutting wire, trimming leads of PCB, crimping terminal, pressing material with glue. SEALS use aluminum material for the body with the advantages of light and convenience. Meanwhile, we adapt the volume adjuster for moderate operation power. It is easy to replace the blade. Other size air nipper bodies and cutting blades are available for various cutting and crimping applications.
Air Nipper / Air Terminal Crimper ( 450kg pressing power)
YM-480
YM-480 has a aluminum die casting body with 56mm diameter with an extending body. This extending body allows advanced cutting and crimping power without increasing tool diameter. So that, it can have an easier holding experience. By equipped versatile blades from SEALS, it could apply in cutting wire, trimming leads of PCB, crimping terminal, pressing material with glue. SEALS use aluminum material for the body with the advantages of light and convenience. Meanwhile, we adapt the volume adjuster for moderate operation power. It is easy to replace the blade.Other size air nipper bodies and cutting blades are available for various cutting and crimping applications.
Air Nipper for cutting plastic - Vertical Angle
FC series
SEALS Air Nipper Blade model, FC-6, keep 90 degree plastic cutting angle. This allow a vertical tool installment. It is suitable for tool body YM-140 and Ym-140L.
- Files Download
Air Nipper & Air Terminal Crimper Catalog
SEALS air nipper and air terminal crimper provides you dozens of cutter blades and crimping plier blades for different application such as cutting, crimping, pressing, punching, sealing, etc.
