Automatic Screw Feeder with Lever-Activating screwdriver set
CM-30T
SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products.
For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
Nickname
Auto Screw Feeding Machine
Features
1. The lever-activating design shall meet the ergonomics and laborsaving requirements.
2. Simply press the lever and the Screwdriver will complete the screw fastening automatically.
3. Automatic feeding to completely save the screw picking and moving action.
4. Applicable for 2.5mm ~ 6.0mm screws.
5. It provides faster operating speed up to 20 ~ 30 screws per minute.
6. The torque-controlled screwdriver is used to improve the fastening quality for the customer.
7. It uses Japan-made electric / pneumatic screwdrivers.
8. Fiber Optic control intellectual-type feeding, saving power while avoiding short supply.
9. The bit pushes the screw for fastening automatically. It prevents the jaw from contacting the surface of the work-piece; thus it will neither rub the product nor produce too much stress.
10. It is equipped with Spring Balancer to provide load free operation experience.
11. You may also select TR-350A, TR-350AE, TR-650A, TR-650AE, TA-300, TA-600, TM-6, THA and THB to provide a variety of accessory combination according to actual work need so as to achieve high-performance fastening quality.
Specification
- Voltage: 220V, Single Phase
- Air Pressure: 5.5 kg / cm² / 85PSI
- L / W / H: 35 / 25 / 38 cm
- Net Weight / Gross Weight: 23 kg / 31 kg
- Capacity: 30 pcs/min.
- Torque: Refer to screwdriver capacity
- Volume: M3 x 15 2000 pcs
- Driver Option : Sumake, Uryu, M&L (Air Screwdriver) or Sumake, Kilews Electric, Delvo (Electric Screwdriver)
Available Screw Chart
Listed below is the typical model of screw sizes that can be accepted for production. (Unit: mm)
(Note) Special specification screws not included in this table also can be used. For details, please contact a serviceperson of this Company.
| Pan Head Round Head | Flat Head Oval Head | Binding Head | Truss Head | Max. L Dimension (L) | ||||
|---|---|---|---|---|---|---|---|---|
| Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | |
| 4.6 | 8 | 4.9 | 8 | 5.2 | 9 | 12 | ||
| 4.5 | 8 | 5.0 | 8 | 5.3 | 8 | 5.7 | 10 | 16 |
| 5.5 | 9 | 6.0 | 9 | 6.3 | 9 | 6.9 | 11 | 20 |
| 6.0 | 9 | 7.0 | 10 | 7.3 | 10 | 8.1 | 12 | 22 |
| 7.0 | 10 | 8.0 | 11 | 8.3 | 11 | 9.4 | 13 | 22 |
| 8.0 | 11 | 9.0 | 12 | 9.3 | 12 | 10.6 | 14 | 22 |
| 9.0 | 12 | 10.0 | 13 | 10.3 | 13 | 11.8 | 15 | 22 |
| 10.5 | 13 | |||||||
Screwdriver Optional
The selection of suitable screwdrivers is a great concern for the quality of the work. In this respect, we select Sumake, URYU Pneumatic Screwdriver and Sumake, Nitto Kohki Delvo Electric Screwdriver as driver options for your choice. Please contact us for the detailed specification of screwdriver.
(Note) The torque values listed in the specification table are provided by Japan's and Taiwan screwdriver manufacturer, which represents the values measured with the Torque Tester under the simplest conditions. During physical locking, the torque values measured will vary according to the utilization conditions.
Accessory
Extension Hopper: Part No. RH-1 (Optional)
- Gallerys
- Movies
- Related Products
Automatic Screw Feeder with servo nut runner
CM-30T-SERVO
SEALS CM-30T-SERVO adopt high accurancy and low reaction force servo nut runner. It can provide the detailed information of every screw fastening.Designed for speed, stability and convenience. It could give warming currently when the fasten is out of setting patterm. And, it will come out a table list for your fastening process.Meanwhile, you could also control the angle and speed of drive to reach the fastening quality requirement. Most of all, you could organized a several fasten series as one job which cannot be done by electric screwdriver.The jaw is customized by particular screw and working environment to provide a stable operation. The lever-activating design shall meet the ergonomics and laborsaving requirements. Simply press the lever and the Screwdriver will complete the screw fastening automatically.With TA-300 torque reaction arm, it provides a steady vertical alignment for screw fastening. It enhances your product assembly quality and reduce the fatigue of operator. Especially for the high torque shut-off screwdiver, it could keep the more stable performance of torque driver than hand-held.
Torque Linear Arm ( 298mm horizontal Stroke)
TA-300
Seals TA-300 Torque Linear Arm provide a 300mm linear motion working radius. With high ranking fine finished steel rod and linear motion ball bearing, TA-300 provides load free experience in horizontal action. Meanwhile, it also have a standard vertical 218mm stroke distance.
Fasten Stroke Cylinder Equipment
TM-6
SEALS Fasten Stroke Cylinder Equipment could integrate the screw driver set of the portable type automatic screw feeder into a auto drived by cylinder. The operator just put the work-piece into the fixture and activate the cylinder by foot padel. The fasten work could be done easily, quickly and quality stably.
- Files Download
Automatic Screw Feeder Catalog
Full information of production line of automatic screw feeder from SEALS. This includes models for portable and automation application to enhance your screw assembly ability, efficiency, quality.
