Spindle Type Automatic Screw Feeding Module
CM-100S, CM-100G
SEALS CM-100S and CM-100G are designed for fully automation purpose. You only need to integrate this module into screw fasten position. SEALS spindle type automatic screw feeding modules provides distance adjustable fastening stroke function, electric screwdriver activate controllable and adequate programable signals such as cylinder positions, torque reaching, screwfeeding or not, etc. By adopting SMC cylinders, impact absorber and linear slide unit, CM-100S and C-100G perform durability, reliability and precision for your best screw assembly components option in automation.
Nickname
Automatic Screw Feeding Machine
Advantages
Automatic Feeding:
Fully automatic operation – lower cost / Semi-automatic operation – the operator can carry out preparation work during running / Double of output is possible.
Easy Maintance:
Easy Torque adjusting without disassembly or tools / Tool bit change in 30seconds.
Efficiency:
Up to 30 screw operation per minute / Automatic screw feeding / Vertical & Horizontal Application Available
Control Function:
Torque / Screwdriving depth / Screwdriving cycle OK, Not OK / Locking Screw warning signal (Optional)
Screwdriver Options:
Six models with different torque range and r.p.m. / Made by Japan Nitto Kohki / Especially for machinery application
Screwdriver specification:
Layout:
01. Torque control electric screwdriver 02. Mounting face 03. Speed adjust Valve for jaw position cylinder 04. Speed adjust valve for bit driving cylinder 05. Jaw Base 06. Jaw 07. Bit 08. Cushion 09. Screwdriver Connection Cable 10. Air hose for two cylinders (Optional) 11. Cable Carrier (Optional)
Features
7, Magnetic-type hand-held automatic screw fastening machine is easy for one hand operation.
Specification
| Model. | CM-100S | CM-100G |
|---|---|---|
| Max. Stroke | 111 mm | 111 mm |
| Min. Stroke | 51.5 mm | 51.5 mm |
- Related Products
Robot Type Automatic Screw Feeder
CM-TABLE
SEALS XY Table automatic screw feeder reduce manpower in screw fastening process. SEALS CM-TABLE screw feeder also could let screw fastening be programmable, data collectable, default detecting to improve assembly quality by system and to enhance the stability without effecting by person. Due to different application, we would adopt belt driven with step motor or ball screw driven with servo motor.
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Spindle Type Automatic Screw Feeding Module by one cylinder
CM-100L
SEALS CM-100L is a basic spindle type screw feeding module for fully automation purpose. Comparing with CM-100S, CM-100G, the one cylinder structure is outstanding in the cost and its narrow pictch requirement. You only need to integrate this module into screw fasten position. SEALS CM-100L provides basic cylinder stroke control and adopts push-start torque control pneumatic screwdriver. Most of all, by its compact design in width, it could install side by side with min. 45mm pitch screw hole application. Meanwhile, CM-100L performs durability, reliability and precision for your best screw assembly components option in automation.p
Multi Spindle Automatic Screw Feeding and Fastening Machine
CM-200~CM-800
SEALS Multi Spindle Automatic Screw Feeding and Fastening Machine, CM-200~CM-800, provide customized design machine for fastening several screw simultaneously. In addition, the rotatory equipment carrying two work-piece fixtures also separate the working and loading area to enhance productivity and safety. Meanwhile, with correspond SEALS reliable feeder and torque control screwdrivers give a stable and efficient assembly output.
Vibration Bowl Type Automatic Screw Feeder for Two Screwdriver Sets
CM-502
SEALS CM-502 Vibration bowl type automatic screw feeder supply screws for two screwdriver sets independently. SEALS CM-502 allows two operators with different screw consumption speed. For each screwdriver set, it could speed up to 45 pcs screw per minute. This could much reduce the unit cost. SEALS CM-502 could design for screw size from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.
- Files Download
Automatic Screw Feeder Catalog
Full information of production line of automatic screw feeder from SEALS. This includes models for portable and automation application to enhance your screw assembly ability, efficiency, quality.
-
CM-100G 3D Design
CM 100G Its press-down start meets different lock payment modes, and it is more flexible and convenient for the stability and operability of the automatic lock mechanism!
