Refrigerator door Application
Refrigerator door
【Case question】
The deep screw hole of the refrigerator door, and the design of the door side to block work, make it difficult for personnel to operate.
【solution】
1. The bit is provided with 3mm pin to achieve appropriate driving depth for the Nipple so sa to avoid unbalanced rim fastening.
2. Reduce the labor caused by the personnel locking the screw lock and increase the speed.
3. The torque-controlled screwdriver is used to improve the fastening quality for the customer.
| Processing methods | Manual work | Automatic Screw Feeder |
|---|---|---|
| Time efficiency | Grabbing/moving/aligning takes a long time | It provides faster operating speed up to 20~30 screws per minute |
| Product quality | Poor locking, quality cannot be guaranteed | Even torque, no gap in lock |
| Human resources | Need a lot of manual participation to complete | High efficiency, one device replaces multiple manpower |
| Future development | Increasing manpower = increasing costs, which will not be considered by the company | Completely replace manual operations and quickly recover costs |
Seals Automatic Screw Feeder Characteristic
Hand held
- Strong versatility, flexible operation, suitable for variable-point operations.
- It is equipped with Spring Balancer to provide load free operation experience.
- Automatic feeding to completely save the screw picking and moving action.
- The torque-controlled screwdriver is used to improve the fastening quality for the customer.
- Simple structure and easy maintenance.
Two Outlets
- One feeder supply screws for two screwdriver sets independently.
- Speed up to 45 pieses of screws per minute/ per screwdriver set.(Total 90 pcs/min./one machine)
- Simple structure and easy maintenance.
Robot Type Automatic Screw Driving Machine
- Thread-slipping detection and warning functions are included.
- Short supply detection and warning functions are included.
- It can be used to support varied height fastening.
- Different working memory modules can be changed in one minute with Control Panel, which is suitable for small-quantity diversified production.
- It can use remote teaching MDI to write programs;or use the computer for online operation.
- Related Products
-
-
Automatic Screw Feeder with Lever-Activating screwdriver set
CM-30T
SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
-
Automatic Screw Feeder with Lever-Activating Design
CM-40T
SEALS CM-40T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-40T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
-
Vibration Bowl Type Automatic Screw Feeder
CM-501
SEALS CM-501 Vibration bowl type automatic screw feeder could speed up to 50 pieces per minute. And, it could design for screw from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.
-
Robot Type Automatic Screw Feeder
CM-TABLE
SEALS XY Table automatic screw feeder reduce manpower in screw fastening process. SEALS CM-TABLE screw feeder also could let screw fastening be programmable, data collectable, default detecting to improve assembly quality by system and to enhance the stability without effecting by person. Due to different application, we would adopt belt driven with step motor or ball screw driven with servo motor.
-
Torque Reaction Arm ( 750mm working radius)
TR-650
Seals TR-650 Torque Reaction Arm has a 750mm work radius from the spindle base. With 365 degree rotation, TR-650 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-650A is for pneumatic tools only. And, TR-650AE is both for electric and pneumatic screwdriver.
-